No1: Leading Industrial Equipment and Material Supplier in Kazakhstan
Timiryazev street 42, pavilion 16, block 4, office 9,

050000 Almaty city, Kazakhstan.

GRANULARS/NEUTRALIZERS/BIOREMEDIATION

Granulars are used to clean the residuals from a spill that pads and rolls just won’t get.

Some specialty granulars like hydrocarbon solidifiers will actually encapsulate oils, which is much better for the environment compared to being absorbed by traditional sorbents. Our large variety of specialty granulars will not only absorb hazardous chemicals, but will also neutralize them at the same time. This is something that sorbent pads and rolls won’t do.

Oil-DriTM

All-purpose floor absorbent. This clay-based product is packaged in poly bags to protect against moisture.

Click image above or the link to learn more...

Floor-Dry

Contains millions of natural microscopic diatom “sponges.” Great, dust-free oil absorbent. Excellent lab pack media. A 20-lb. bag of Floor-Dry will absorb more than a 40-lb. bag of clay. All-purpose absorbent absorbs most liquids.

Click image above or the link to learn more...

Perlite

Perlite is a nontoxic, nonflammable, lightweight, environmentally safe and friendly absorbent that can absorb and hold most liquids, while leaving little or no residue. Less than half a pound of Perlite can completely absorb one quart of motor oil without leaving any residue to clean up. Clay, earth and sand products require 15 pounds of material to absorb the same amount and would leave a slippery residue.

Click image above or the link to learn more...

Vermiculite

Vermiculite is used as a lightweight filler, liquid absorbent, paint filler/texturing agent, and liquid waste solidification agent. Used during shipping and lab packing. Can be used on all liquids.

Click image above or the link to learn more...

Cellulose

A universal/maintenance sorbent made from recycled cellulose. It absorbs six times more than clay. Other benefits: noncarcinogenic, lightweight, low dust and nonabrasive. Absorbs both oil and water.

Click image above or the link to learn more...

Absorbent W

Made from 100% recycled cellulose pulp, treated to absorb oil-based liquids — not water. Hydrocarbons are absorbed into the fibers and will not leach or drain. Ideal for removing contaminants from water.

Click image above or the link to learn more...

Gran-sorbTM

Lightweight, recycled paper waste soaks up oils, coolants, solvents, water, fuels and antifreeze. This is a safe product because paper waste is nontoxic and nonhazardous.

Click image above or the link to learn more...

Dri-ZorbTM

All-natural coarse corn cob is a great replacement for clay. Use this in most industrial applications. A great absorbent for cutting oils, greases, water, etc. This is not intended for use with aggressive fluids.

Click image above or the link to learn more...

Our HCS Polymer Boom is ideal for use in the marine environment.

Perfect for use at fuel docks and marinas. The HCS Polymer Boom can be placed in scuppers on ships to prevent hydrocarbon run-off from the decks of commercial vessels, and in engine rooms or bilges to remove oil from water. Booms also can be used on land applications to prevent hydrocarbons from entering storm drains.


A leap beyond absorption!

HCS polymers are used to solidify and suppress harmful vapors of sheen, gasoline, diesel and oils, including crudes, upon contact. The byproduct is a solid, rubber-like material that floats in water.

Environmentally friendly, HCS polymer has been tested not harmful to aquatic life and waterfowl. The solidified byproduct is 100% recyclable as raw material for rubber and plastic production or asphalt, or can be burned as fuel.

Depending on your local and state regulations, HCS polymer also can be disposed of in a landfill. Other uses and applications are in the utility industry for SPCC Secondary Containment, and in oil contamination removal in underground vaults and manholes; HCS polymer also can be used to filter water in storm drains or industrial waste streams.
> Nontoxic, noncarcinogenic, noncorrosive, nonhazardous
> Nonbiodegradable; encapsulated waste will not produce a hazardous leachate
> Solidifies up to 8 times its own weight
> Versatile — hydrophobic by nature, so you can use it to clean spills on both land and water
> Safe and easy disposal

Click image above or the link to learn more...

Super Absorbent Aqueous Polymer

Minimal Volume & Weight Increase = Lower Transportation & Disposal Costs

Used for cleaning water-based spills and sludge stabilization. Hazardous and nonhazardous industrial waste streams often must be solidified and stabilized to pass the paint filter test prior to placement in appropriately permitted landfills. Industrial solidification traditionally has involved the addition of various agents, including kiln dust, saw dust and portland cement. This significantly increases the volume of material requiring transportation and disposal. The polymers solidify industrial liquid wastes with a nominal volume increase and ensure that liquid wastes pass the paint filter liquids test. Given the capacity to retain substantial volumes of water, there is limited increase in weight of solidified mass, thereby minimizing transportation and disposal costs.

Used in the solidification and removal of hazardous, nonhazardous and radioactive waste, super absorbent polymers are finding new uses in industry. Our polymers have been proven to be more cost-effective than alternatives on the market. In fact, Super Absorbent Polymers can absorb up to 275 times their weight in liquid. (Also available in super sacks.)

Click image above or the link to learn more...

Aqueous Polymer/Bentonite Blend

Rapid solidification of aqueous sludge streams with residual organics and petroleum contamination

This is a blend of super absorbent aqueous polymers and bentonite and organo clay. The polymers will absorb up to 275 times their weight in water, and the bentonite clay will absorb the oil. This product is great for sludge stabilization prior to and during transportation. If you have hydrocarbons mixed in with your sludge, the aqueous polymer alone will not work; bentonite is needed to absorb the hydrocarbons.

Click image above or the link to learn more...

Acid and Base Neutralizing Polymers: Pads, Socks, Pillows & Granulars

Used to neutralize and solidify a wide range of both acid and base spills, thus reducing the risk of possible workplace injuries. These highly effective spill control products contain a neutralizer, pH indicator and a super absorbent polymer to safely clean up aggressive chemical spills. Its unique formula reacts with the spilled chemical, converting the fluid into a gelled mass for safe, easy cleanup. A color change will appear letting you know that neutralization is taking place. Neutralizers are available in pillows, socks, pads and granular form.

Acid Neutralizer, 2 lb. Shaker

Acid Neutralizer, Sock

Acid Neutralizer, Pillow

Acid Neutralizer, Pads

Acid Neutralizing Spill Kit

All absorbents in this specially designed kit bothnneutralize and soak up acidic spills; cleanups are moremcomplete and safer. Use socks to confine spill before itncan spread; use pads, pillows and granular neutralizer to soak up spill. Not for use on hydrofluoric acids.

Click image above or the link to learn more...

Kit Contents
10 Acid Encapsulating/Neutralizing Mats (12" x 12")
2 Acid Neutralizing Socks (2" x 4')
2 Acid Neutralizing Pillows (12" x 12")
2 Shaker Bottles Granular Neutralizer (2.5 lb.)
1 Splash Goggles
1 Pair Nitrile Gloves
1 Apron
2 Temporary Disposal Bags w/Ties

Liquid Neutralizers

Liquid neutralizers generate less gas and heat during neutralization than dry formulas. Use liquid formula by spraying on vertical surfaces or pouring into tight corners and hard-to-reach areas. Use liquid HF Acid Eater for hydrofluoric acids. The standard liquid acid neutralizers cannot be used on hydrofluoric acid.

HgX® Mercury Decontaminant Powder

For the reduction of toxic mercury vapor, HgX® is an inexpensive, water-soluble, nonhazardous, metallic-mercury/sulfide-converting powder with a chelating compound and dispersing agent. It reacts rapidly, forming a film over the finely divided, nearly invisible beads of mercury and reacting to produce a nonvaporizing sulfide. Further, HgX® keeps on working. Particles of HgX® left on cleaned surfaces are reactivated during subsequent cleaning.

HgX® is not harmful. None of its components are classified as toxic. It leaves no odor. And no allergic reactions ever have been reported, even after continuous use under various conditions.

HgX® is stable. It is supplied in polyethylene drums and can be stored safely up to one year without any loss of activity.

Click image above or the link to learn more...

Bioremediation is the process of using microorganisms to digest harmful contaminants and turn them into nontoxic compounds. Nature will heal itself, but it often takes a great amount of time. Using microbes helps speed up this process by concentrating the number of helpful microorganisms within a given area. Microscopic organisms digest hydrocarbons and transform them into harmless carbon dioxide and water. Bioremediation is a safe, natural process that produces no harmful byproducts. Since it can be done on site, it is often more cost-effective than having soil or water hauled away for burning or other reclamation. It is also safer for workers, because no harmful chemicals are used in the process

Click image above or the link to learn more...

Remediact

Remediact™ is an innovative concept in the remediation of soil saturated with hydrocarbon contaminants. It is designed to allow industry to clean up and restore soil to its pre-contaminated condition. Remediact™ is a natural absorbent that has been specially treated with hydrocarbon-digesting microbes. These microbes have the ability to turn most hydrocarbons into carbon dioxide (CO2) and water. When used according to the directions, Remediact™ safely and effectively solves your contamination problems with very little labor and equipment expense, thereby making this product an essential part of your pollution control efforts.

 

DOWNLOAD:

Call +7 727 346 6262

Your best supplier in industry

LLP «Independent Commercial Company VORTEX»

Address: 050000 Almaty city, Timiryazev street, pavilion 16, block 4, office 9.

Phone: +7 (727) 346-62-62

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Web: www.iccvortex.kz

We work: monday-friday, 09.00-18.00 

 

© 2016 ICC VORTEX. All Rights Reserved. Designed By LLP ICC VORTEX team. Leading Industrial Equipment and Material Supplier in Kazakhstan.

Please publish modules in offcanvas position.